New in Box - Seastar 1.4 Outboard Steering Hydraulic Helm HH5269-3 - OEM

Description

Seastar Solutions Teleflex 1.4 Outboard Steering Hydraulic Helm HH5269-3
SeaStar helms are designed for ultimate efficiency, safety and reliability, with easy installation and maintenance.
Replacement front mount hydraulic helms for your steering system. Each helm has a 4 7/16" footprint, 3/4" tapered shaft and nut. To verify which helm you have, simply look at the end of your steering shaft for a 1.4, 1.7, 2.0 or 2.4 stamping. We recommend during installation that you thoroughly inspect hoses and connections for signs of excessive wear.
Key Features
Compact, stylish design
Convenient front-of-dash fill
Small 3"dia. hole cutout on dash
Can be retrofitted into old SeaStar 4 1/2"dia. dash cutout
Complete with elbow fittings
Choice of 1.7, 2.0 or 2.4cu.in. displacements
Two-Year Limited Warranty
Installation
Retrofitting these helms into the older 4 1/2"dia. dash cutout requires the use of
Back Plate Kit HA5418
(Model 464552). If desired, you can reduce the distance the helm protrudes from the front of the dash to 3 3/4" with the
Round Bezel Kit HA5478
(Model 13481015). To adjust the helm's angle to 20° in relation to the mounting surface, use
Wedge Kit HA5419
(Model 435190).
For general installation instructions, see the
Front Mount Helm Installation Manual
.
Caution:
SeaStar helm pumps with manufacturer numbers that end in "-3" (like the ones we offer here) are fitted with positionable O-ring style hose fitting ports (commonly referred to as ORB). DO NOT attempt to install an NPT pipe fitting into "-3" helm hose fitting ports. Doing so will lead to irreparable damage to the helm. The manufacturer recommends use of SeaStar Solutions O-ring style hose fittings.